|
Why Power Mate?
Features
Key benefits
Articles
Voltguard
Contact
Buy-now
Links
GALLERY "STORCH"
Hook-UP
DIAGRAM
| |
|
ARTICLES
Letters from satisfied
customers:
From:
Tony Hayes, CFI at
Watts Bridge, Toogoolawah Qld., Published in Brisbane Valley
Leisure Aviation Centre,
Bulletin #9, 1/98.
Via an in- air failure, Rob and I
came up for a Rectifier/ Regulator replacement and chose the
"POWER MATE"
which has been well advertised in the ultra light
magazines - we were drawn mainly by the "clean" output.
The device was fitted in the roof to take advantage of the T
500's in cockpit forward airflow with the doors off, and in line
with
the manufacturers requirement for cooling. A great investment.
Radio and Intercom noise cleaned up, battery at 13.8
volts as advertised,
excellent sales interest and back- up from
Claus.
This article has been published in
'Pacific Flyer', Feb. 2003.
NEXT
|
Media Coverage of
POWER MATE.
Jim Cuthill
- falconhk@mcmedia.com.au
- no homepage
- 2005-09-30 07:34:10
Recently purchased &
fitted Powermate Reg, what a difference to the noise factor in my
intercom system, I have been struggling with annoying background noises
in my ch601 Zodiac, Thanks to powermate, they have totally dissapeared.
Thanks .
Walter Bovijn
- w.bovijn@telenet.be
- no homepage
- 2005-08-11 12:56:45
We fly a Jodel D18
powered by a 2200A jabiru engin.
Within 10 months we faced 3 blown up regulators and 2 damaged batteries.
Since 3 months we use a
Power Mate voltage regulator. It is the only regulator who can handle
the 20-120 volts voltage swing You find on the Jabiru generator.
ted clement
- mlclement@ptmc.net
- no homepage
- 2003-11-25 00:44:10
> Claus, I fly
an Xair with a Jabiru motor and a number of people have had problems
with their regulator (made for Kubota tractors) putting out too
> much power and cooking their expensive avionic equipment. A friend of
mine caught his just in time and that convinced me to put your 8 amp
Power Mate
> on mine to ward off any such problems. It performs just as you
advertise; mine gets only just over 14 volts at the highest, and at
cruise it runs a
> steady 13.8 amps. The installation instructions were very clear.
Needless to say I am most satisfied. Thank you,
Ted Clement / Xair. Jab/USA
|
